Cinglink drivers download update

If you're not sure how to configure your program then please click here. If you don't have Adobe's Acrobat Reader, click on the icon to get it. If you would like to run packet with the SignaLink, Ralph's web site will show you how. Thank you Ralph! SSTV is one of the few modes where you frequently switch between Digital operation sending pictures and Voice operation talking about the cool picture that you just sent! This will allow you to keep your microphone plugged into the front of the radio, so that you can talk between pictures.

Joe Taylor, K1JT, is the expert on weak signal modes. Joe continues to develop new modes that push the envelope for weak signal operation using EME "moonbounce" , meteor scatter, and ionospheric scatter. Features: Dual server and client mode: Can be configured to operate back-to-back in a client and server.

Allows for hosting a KAT Remote for monitoring and controlling the amplifier. This program has a built in server and client. Allows for hosting a KPA Remote for monitoring and controlling the amplifier. NET 4. K2 Voice provides complete K2 voice feedback frequency, mode etc. Installation To save these files, rather than running them directly from the web site, you may need to right click on their links and then chose the "Save Link As.

Further, they are unsupported, contributed utilities. They have been tested only on the Windows versions listed. They are offered as examples only. And vista for K3 Voice. They are provided free, without warranty or ongoing support for your use.

K2s will require the KIO2 option. Our goal is to make the K3 and K2 useful for hams who are unable to see the normal controls and displays. It will report most common operations on using the soundcard in your PC. The Programs operate in one of three modes:. Cart List. X Close Cart. Check out the November Specials.

Not all products are subject to a regular update. KPA Firmware 2. An ethernet connection is required to obtain new software. It is also possible to load or re-load software from a USB flash drive. For further information on that topic, please refer to the K4 Operating Manual. The K4 provides new features via software. See K4 Software Release Notes for complete revision history. See instructions below. No hardware modifications are required. Select the 6 meter band. Connect a dummy load rated at 50 W or higher to the transceiver.

Set the PWR control to 50 watts. Place the ATU in bypass mode. Tapping it a second time would return to the original non-attenuated setting. Exit the menu. See Specifications for max output at 51 MHz and higher.

KPA and some logging programs poll with these messages. DM; command, without a specified frequency, shows all the stored ATU settings for the currently selected frequency segment bin Add FTNS; command to perform full search tune, but skip saving the result. ATU settings can then be saved with SM; if desired. Revise frequency counter to better track SSB TX count changes Favor frequencies supplied by command or transceiver over the frequency counter Align bins to band boundaries. The first 80 meter bin is now kHz rather than SWR Threshold for amplifier key interrupt may be configured high to disable this protection mechanism.

Download the latest KAT Firmware. Important - Please read before installing the latest Production Firmware No special instructions at this time. Current Production Firmware Release Notes Download the latest KPA Firmware.

To do so, please download and install the KPA Utility first, then use it to load the latest firmware. This utility version will support the configuration features discussed in the Release Notes. Current Production Firmware Release Notes 1.

Holding down F5 on power up selects Encoder rates can now be configured via USB for K4 use. Important - Please read before installing the latest Production Firmware If you have firmware older than indicated below, please be sure to follow the steps below. Use this utility to check for the latest releases of new features for your K-Pod.

The value is not automatically updated on band change; update always occurs on any transmit. It will take care of the download and installing Production Firmware Before loading Production Firmware, please ensure you have installed the latest version of the KX3 Utility.

It will take care of the download and installing Production Firmware Before loading Production Firmware, please ensure you have installed the latest version of the KX2 Utility. Change PC side RS to 1 stop bit when transferring image. Most types of flash drives are supported. Adds : Frequency displays now show all digits including the Hz digit. This includes the center frequency adjustment and marker values. Note that markers adjust by values determined by the current span setting.

Adds : To enter the text decode scratchpad, you can now use either Insert or Alt-P. To send the scratchpad, you can now use either Ctrl-Insert or Ctrl-P. It will take care of the download and installing Production Firmware Before loading Production Firmware, please ensure you have installed the latest version of the PX3 Utility. Added 6 meter selector in default band-map Holding F4 on power up now replaces band-map with the default band-map.

Fixed problem with serial communications when loading band-maps. It will take care of the download and installing Production Firmware Before loading Production Firmware, please ensure you have installed the latest version of the XG3 Utility. The vast majority of technical issues can be resolved with the information that is available in our written documentation and on the Support pages of our web site click here for help with your SignaLink. If you thoroughly investigate these resources, you will probably never need to contact our Support Staff.

Please take some time to read through your product manual, and then check the online support resources to be sure that you have the most current software and documentation available. If you still need assistance, then please contact our Technical Support Staff at the number listed below, or by email if appropriate see below. Thank you. We recommend that you download and evaluate several programs to determine which ones work best for you.

If you have questions about a specific program, or if you have trouble getting it to work with your system, then you will need to contact the author of the program directly for help.

Questions or problems with the operation of the SignaLink should of course be directed to our Technical Support Department. The programs on this page are listed in alphabetical order by program name. To the right of each program name you will find information about the program, such as the modes and Operating Systems supported.

When you find a program that you would like to download, simply click on the program name. You will then be transferred automatically to the authors web site or another page where the program can be downloaded. However, some programs cannot access the Windows software volume controls properly in these later versions of Windows. Because of this, we suggest that you adjust the software volume controls only through Windows instead of your program's "Adjust Waterfall Drive" or "Adjust Transmitter Drive" or similarly worded menus.

Instructions for doing this in these newer versions of Windows can be found on our SignaLink Support page. Again, most communication programs that work in Windows XP also function just fine in Windows 7, 8. Be sure to see our instructions for configuring your communication program. If we don't have the program that you are using listed, then be sure to see the " General Setup " section as it applies to ALL sound card programs.